Boarmaster 40 – Demo Unit

The Fusion Thermal Boarmaster 40 offers so much for the money it’s easy to understand why this product is so commonly out of stock. Purpose built for folks that want uncompromised optical performance we made a few changes that dramatically reduced price without dramatically changing performance. Gone are things like video, photo and WIFI plus a few other insignificant bells and whistles, but the biggest savings comes from our choice of sensor. In the Boarmaster 40 we use our WAVE17 sensor instead of the more expensive WAVE12. Thermal scopes with 17-micron sensors are sometimes viewed as obsolete technology and this is unfortunate as it’s not true. The 17-micron sensor is the backbone of the industry and is produced in huge quantities, therefore they are more affordable. Their only disadvantage is they require larger optical systems to produce great images. Thus, using a 17-micron sensor in a compact scope may result in a slightly lower optical magnification and a shorter identification distance, but that’s about it. This creates a huge buying bargain for guy who does his homework and understands the value of proven technology. You might have also noticed that we increased our lens size to 40mm as compared to most of our competitors who are stuck on 35. This was done specifically to boost overall performance back up to 12-micron levels. Plus, our Boarmaster 40 uses the Fusion Thermal WAVE17 sensor, so it delivers performance way above its class. To top it all off the sensor is teamed up with our Arclight Ultra HD Germanium Lens so you’re getting full potential from the entire system. The performance of this scope is so good we hope you get a chance to compare it side-by-side to the competition. Feel free to choose any competitive scope within a thousand dollars when doing so. When it’s over we know you’ll see for yourself why the Boarmaster 40 is such an amazing bargain.

Friends, if you’re stretching the budget joining the thermal revolution look no further than the Boarmaster 40. It performs so well and offers so much for the money; you might just think you found the proverbial diamond in the rough.

Fusion Thermal Exclusive Technology

T3 Control System – Your Fingers Won’t Get Lost in the Dark
The only thing cooler then the way our T3 – Three Button Control System looks is how easy it is to use. Our highly intuitive three button design with its center tower makes using your thermal scope simple and easy. Every command you need is right at your fingertips, and the Center Tower evenly splits the button control panel, so you always know where your fingers are. We thought this a particularly good thing since you’ll be using it in the dark most of the time. Besides simpler is better, and the T3, well it’s as easy as 1-2-3.

KISS (Keep It Simple Stupid) Menu – You Might Never Read the Manual
You know the phrase, Keep It Simple Stupid, and at Fusion Thermal it’s the reason we can make the industries boldest statement: Our operating menu is so easy to use you’ll likely never read the instructions. Yep, that’s right. Finally, a highly advanced electronic device that doesn’t require a PHD to use. How’d we, do it? It was simple. We don’t care about making our products usable by someone on the other side of the planet, so or menu uses words and not confusing icons. Words that are in English, with instructions that are written for Americans by Americans. Wow, the happiness you find by keeping things simple.

Micro Click Focus – Forget the Dog Collar
Getting your target into focus quickly and easily is a must, and you won’t find a better system than our Micro Click Focus. Our tall tactile focus knob is conveniently located on top of the front lens assembly so it’s easy to reach and easy to find, even in complete darkness. This is critical if you want to keep your eye in the scope and on target, and unlike the dog collar design used by most of our competitors you won’t need to perform a circus act or trash your shoulder just to focus your scope. Plus, you’ll always get your best shot as the micro click adjustments put you exactly on top of the perfect focus point every time. This feature is such a big advancement over the competitive design its often touted as this thing our customers love most about our scopes.

XGEN Alloy Housing – Plastic is for toys. Metal is for tools. 
It’s a fact, operational heat is the enemy of all thermal devices, and if your thermal can’t get rid of the heat it generates your image quality will suffer. Worse yet is the long-term damage this heat will cause to everything in the device. Your thermal was expensive, and you’ve got to get the heat out to keep it operating properly. This is why we never use plastic or other polymer housings. Plastics and polymers are insulators and aluminum alloys are conductors, one traps heat, and one gets rid of it. It’s that simple. Sure, plastic is ridiculously cheap but it’s a shortcut we refuse to take, and it’s something nearly all our competitors do. Our XGEN (Next Generation Alloy Body) shields your expensive investment in a clad of armor, and our high-end 6082 Structural Aluminum Alloy displaces heat 71,900% better than plastic*. This is a huge difference and reason alone why you should buy one of our products. Think about it, if our competitors are taking a shortcut on something this obvious, what else are they skimping on? It’s your money buy something of value with it.

*Source Sciencedirect.com Thermal Conductivity Coefficients: Plastic & Epoxy Glass Fiber W/(m-K) = 0.25 max as compared to AL 6082 Aluminum W/(m-K) = 180

WAVE Sensor Technology – Spend Less, Get More
Is it possible for one 384 sensor to outperform all other 384s, and even some 640s? Is it possible for one 640 sensor to clearly outperform all other 640s? The answer to these questions is yes, a resounding yes. Don’t be fooled into thinking a sensor resolution specification is the definitive guide to quality, performance and longevity. The difference in what you get from one thermal to the next can be HUGE! Our WAVE sensor technology sets the standard for the industry, and delivers performance that consistently exceeds expectations. The WAVE, Wavelength Area Variation Expansion, is a technology born from our obsession about thermal technology, and why we live by the slogan Perfecting the Vision of Heat. It’s the reason our products outperform others that cost more, sometimes thousands more. Every single pixel on a WAVE sensor is carefully optimized to increase its temperature variation uniformity and sensitivity. This results in an increasingly more precise electrical signal being sent to the display, and why you’ll discover a visual experience that you simply were not expecting.

Its true, you usually get what you pay for, but you don’t always have to pay more to get more. Fusion Thermal’s WAVE technology is an industry game changer, and our products are why people are spending a lot less to get the performance they want. Yes, it can happen, you can get more for your money, and Fusion Thermal is here to make it happen.

 Arclight Ultra HD Germanium Lens – Seeing is Believing
The single most expensive and important component of a thermal optic is its germanium objective lens. If you go cheap here it doesn’t matter how good the rest of your components are, the unit will never perform to potential. Arclight Ultra HD Germanium Lenses are not cheap, but they are key to making everything else perform exceptionally well. The purity of the Arclight Lens pushes the limits of technology and perfects the task of funneling infrared rays into the thermal sensor unhindered by distortion. This infrared energy dump unleashes the full potential of our supercharged WAVE sensor. The resulting image quality is exactly as expected, perfection!
Perfecting the Vision of Heat. It’s what we do, it’s who we are.

Premium Tactical QD Scope Mount
To complete the offering each Boarmaster 40 is equipped with a premium grade tactical scope mount. These mounts are made to exacting standards by a quality US manufacturer. Users should feel free to take the scope on and off as often as desired and should have complete confidence that a precise return to zero will be achieved when scope is reattached. You just need to remember to put the scope back to the same spot on the rail when reattaching.

ITAR Control StatementThis product is subject to the International Traffic in Arms Regulations (ITAR). You many not export, re-export, resell, transfer or otherwise dispose of this product to any other country without first obtaining approval from the U.S. Department of State, Directorate of Defense Trade in accordance with the ITAR, Title 22, and Code of Federal Regulations Part 120-130. Diversion contrary to U.S. law is prohibited. View our Export Policy